How to Program Garage Door Opener: A Simple Guide for Homeowners


Your garage door opener is a fantastic piece of technology that offers convenience and security for your home. At times, though, you might need to reprogram it—whether you’ve got a new remote, experienced a power outage, or just want an added layer of security. 

If you’re wondering on how to program garage door opener, you’ve come to the right place. This easy-to-follow guide will take you through the process step by step.

1. Getting Ready 

Before you begin to program your garage door opener, ensure that you have:

  • Your garage door opener remote.
  • A ladder or step stool to reach the garage door opener unit.
  • The owner’s manual for your specific model (this can be very helpful).

2. Locating the Learn Button 

The first step in programming is to locate the ‘Learn’ or ‘Program’ button on your garage door opener unit. This button is typically found on the back or side of the unit and might be under a light cover. Once located, you’re ready for the next step.

3. Programming the Remote 

Here’s a basic outline of how to program a garage door opener remote:

  • Press and release the ‘Learn’ button on the garage door opener unit. A light will flash, indicating it’s in programming mode.
  • Within 30 seconds, press and hold the button you wish to program on your remote. Release the button once the garage door opener’s lights flash or you hear a clicking sound.
  • Test your remote to ensure it operates the door.

Note: If you have a rolling code garage door opener, the steps might vary slightly. Always refer to your owner’s manual for specific instructions.

4. Additional Remotes or Keypads 

If you have additional remotes or an external keypad, you’ll repeat the above steps for each device. Remember, most garage door openers can handle several devices.

5. Erasing Old Codes 

For security reasons, you might want to erase all old codes from your garage door opener, especially if you’ve lost a remote. To do this:

  • Press and hold the ‘Learn’ button until the indicator light goes out (this usually takes about 6 seconds).
  • All codes are now cleared from the opener. You’ll need to reprogram your remotes and any other devices.

6. Safety Tips 

Remember to always:

  • Keep your remotes out of reach of children.
  • Periodically check the functioning of your garage door opener and remote for safety.
  • If you face any challenges or unusual issues, consider seeking professional help.

Need Assistance? 

Programming a garage door opener is usually straightforward, but if you encounter problems or feel unsure, don’t hesitate to call for professional help. 

The Garage Door Repair Guys of Edmonton are always available to assist with all your garage door needs, from programming to maintenance and repairs. After all, ensuring the proper function of your garage door is crucial for both convenience and safety.


Knowing how to program garage door opener remote devices is a handy skill that can save you time and enhance the security of your home. 

With the above guide, you’re well-equipped to do it yourself. But if ever in doubt, remember, experts like the Garage Door Repair Guys of Edmonton are just a phone call away. Experience safe programming.

0/5 (0 Reviews)



More Posts

University of Alberta Botanic Garden

Exploring the University of Alberta Botanic Garden in Edmonton

Nestled near Edmonton, the University of Alberta Botanic Garden offers a serene and educational escape into the world of flora. Spanning over 240 acres, it’s a place where nature, education, and culture intertwine, providing visitors with a unique and enriching experience

Send Us A Message


10% Off

On all garage door repair services