Top 5 Common Garage Door Repair Issues in Edmonton and How to Fix Them

In this article, we will discuss the top 5 common garage door issues in Edmonton and the solutions on how to fix them. From a garage door that doesn't open or close to broken garage door parts and the common issues people experience
Garage Door Repair Northwest Edmonton

Top 5 Common Garage Door Repair Issues in Edmonton and How to Fix Them

If you’re trying to open your garage door and nothing happens it might be few issues, in the next few steps we will troubleshoot to understand if it’s a small issue we can fix ourselves or we should call a professional garage door company.

Issue 1: Garage Door Won't Open - What to Do

Firstly, make sure that the opener is working properly. Check that it’s plugged in and that the circuit breaker or fuse hasn’t tripped, if it is connected to the power try pulling the red cord to disengage the opener and see if the door opens, if it still doesn’t open than we might need to check the springs if they’re broken.
Stand inside the garage while the door is closed and look at the top of the door, if the spring is broken you will need a professional garage door repairman to get those garage door springs replaced.

If the springs are intact take a look at the tracks and ensure that they’re clear of debris and properly lubricated. If the tracks are bent, they may need to be repaired or replaced.

Before calling a professional, make sure to re engage the opener by pulling the red cord and put it back in it’s place and if none of these steps work, it’s best to call a professional for garage door repair in Edmonton.

Issue 2: Garage Door Doesn't Close - Possible Causes and Solutions

If your door stays open after pressing the opener remote it might mean a couple of things:
Blocked sensors, damaged railings, traveler disengaged or a faulty opener.

In order to troubleshoot this first see if the opener is trying to close the door, if it’s trying to close the door and goes back up again it might mean that something is blocking the sensors, try to clean them or re-align them.
To align the sensors make sure one side has a light color of green and the other is yellow.

If the sensors aren’t at fault, check the door railings to make sure there isn’t any debris stuck there or that it is bent, in case they are bent it will be better to call a garage door company to get a professional to come out and inspect it.

Another thing we need to check is if the traveler is engaged – to check that just pull the red cord and move it until you hear a click. Once you hear that click try to close the door again.

And if all of these steps doesn’t work it probably means that you need a garage door opener repair as it might mean that your opener is faulty.

Issue 3: Garage Door Opens Only Halfway - Common Causes and Solutions

If your garage door opens only halfway there are 2 main culprits:
Either the opener settings or the garage door springs.

The best way to see where the fault lies is to stand inside the garage with the door closed, and look at the top of the door to see if the garage door spring is intact (the big spring that’s on the metal rod).

If the spring is intact that’s good, it just means that you will need to re-program  your garage door opener.
For instructions on how to reprogram your garage door opener check the manufacturer website.

Issue 4: Garage Door Cable Snapped - How to Identify and Fix the Problem

If you suspect that your garage door cable snapped, than it’s best to leave the door and not try to open or close it as you might get the door to go off-track.

In order to identify a snapped garage door cable look at the sides of your garage door, if you see a metal wire loose it means that either your cable snapped or it just got out of place.

In cases like these it’s best to get a garage door repairman and get your garage door cable repair done by a professional to avoid further damages to the door.

Issue 5: Garage Door Opener Isn't Working - Common Causes and Solutions

If you find that your garage door opener isn’t working then there are a few steps to check:

  1. Check the power source. Make sure the opener is plugged in and the circuit breaker or fuse hasn’t tripped.
  2. Check the remote batteries. If the batteries are dead, the opener won’t work. Replace the batteries.
  3. Check the opener settings. Ensure that the opener is set to the correct settings for your door. If it is not, adjust the settings accordingly.
  4. Check the opener’s force setting. If the force setting is too high, the opener may stop the door from opening all the way. Adjust the force setting accordingly.
  5. If none of these steps work, it may be time to call a professional for garage door opener repair in Edmonton.

Conclusion

The Benefits of Choosing The Garage Door Repair Guys Edmonton

As a homeowner, it’s important to have a reliable and trustworthy garage door repair company to make sure that you get the best service for your garage door.

At The Garage Door Repair Guys Edmonton, we understand the importance of having a reliable and trustworthy garage door repair company on speed dial for when issues arise.

As a team of experienced professionals, we can handle any issue, from a garage door that won’t open to a snapped cable. We pride ourselves on offering same-day garage door service, using only the highest quality parts and equipment. Our garage door emergency repair ensures that your garage door is in good hands, even outside of regular business hours.

When you choose The Garage Door Repair Guys Edmonton, you can be confident that your garage door will be back to working properly in no time.

Don’t wait! give us a call and schedule your same day garage door repair service in Edmonton!

Share:

Facebook
Twitter
LinkedIn

More Posts

Send Us A Message

BOOK YOUR APPOINTMENT AND GET

10% Off

On all garage door repair services